Water-Based Epoxy Mortar Floor Coating | High-Pressure, Anti-Dust Industrial Flooring Solution
- Model
- PU-035
Review
Description
Information
Water-based Epoxy Mortar Flat Coating Flooring Material
This water-based epoxy mortar floor coating is an eco-friendly, low-VOC solution for heavy-duty industrial areas like workshops, warehouses, and logistics centers. Combining the high compressive strength of the mortar layer with abrasion resistance and anti-dust properties, it ensures chemical resistance, impact resistance, and a smooth, easy-to-clean surface. Quick installation and strong adhesion guarantee long-lasting performance.
Scope Of Application
Require wear resistance, resistance to a certain impact of electrical appliances, electronics, machinery (such as cars motorcycles, elevators, bicycles, etc., communication equipment, instrumentation, food, medicine, chemical, tobacco, beverage, textile, beverage, clothing, furniture, plastics, recreational goods and other manufacturing workshop floor, especially need to run forklifts, cars, heavy carts walkway.
Product Features
1. waterproof, moisture-proof, wear-resistant;
2. and impact, good hardness, high load;
3. can do non-slip ground, matte or highlighter ground.
Construction Technology
1. base surface treatment;
2. Paint the sealing primer;
3. batch of water-scraping epoxy mortar;
4. batch scraping putty;
5. Grinding and vacuuming;
6. Apply water-based epoxy coating.
Construction Section Diagram
TECHNICAL INDEX
PILOT PROJECT | INDEX | |
State in container | The liquid component is uniform after stirring State; Powder components should not be caked | |
Film appearance | No cracks on the surface, uniform color | |
Initial flow value /mm | ≥130 | |
Vica softening point /°C | ≥140 | |
Tensile and compressive strength (MPa) | 24H | 20 |
7d | 40 | |
Flexural strength (MPa) | 24H | 5 |
7d | 10 | |
Wear resistance (700g/500r. Weight loss g) | ≤0.15
| |
Skid resistance | ≥0.6 | |
Tensile bond strength (MPa) | ≥2.0 | |
| Impact resistance (1000g steel ball) | No surface cracks, no peeling | |
Water resistance (168h) | No cracks, no bubbles, no peeling Drop, allow slight discoloration | |
Acid resistance (10%H₂SO₄,48h) | Does not blister, does not flake, allows light microdiscoloration | |
| Alkaline resistance(20%NaOH,72h) | ||
| Oil resistance (120# solvent gasoline, 72h) | ||
| Salt water resistance(3%NaCl,168h) | ||
Project Case
