Microbead Anti-Slip Epoxy Flooring - High-Traction Durable Industrial Floor Coating | Eco-Friendly & Customizable
- Model
- PU-029
Review
Description
Information
Epoxy Microbead Anti Slip Flooring Material
Designed for high-traction environments, our microbead anti-slip epoxy flooring integrates specialized beads to enhance surface friction, perfect for workshops, parking garages, and warehouses. Offers exceptional durability, chemical resistance, and eco-friendly safety compliance. Fast installation with customizable colors and textures, ensuring long-lasting slip resistance and visual appeal.
Scope Of Application
The ground of special places such as supermarkets, halls, warehouses, car showrooms, car repair shops, car parking lots, etc. Areas with high mechanical performance requirements, with a certain impact of machinery, electronics, electrical appliances, meters, medicine, textile, clothing, food, tobacco and other enterprises factory floor.
Product Features
1. the surface particle fineness is uniform, small fluctuation, large resistance, good anti-slip performance.
2. reasonable structure, smooth and comfortable no vibration, low noise, the United States is only slippery.
3. pressure resistance, wear resistance, impact resistance, long service life.
4. firmly bonded with the base, the surface is seamless, not easy to flake or crack.
5. good drainage performance, no pollution, reduce and even eliminate water splashing and water film, increase rainy day driving safety.
Construction Technology
1. Base surface treatment: use a grinding machine to polish and vacuum to form a basically flat, dry and clean base surface.
2. primer layer: mix the material according to the ratio, and then use a blender to stir evenly; Use a professional scraper or use a professional roller rolling coating, to achieve uniform no omissions.
3. medium coating mortar layer: the color paint and curing agent according to the specified ratio (weight ratio) mix and stir evenly; Slowly add appropriate amount of quartz sand, using a professional flat knife for batch scraping.
4. medium coating putty layer: the color paint and curing agent according to the specified proportion of mixing, fully stir evenly; Add an appropriate amount of quartz powder to stir, and scrape the whole batch with a flat knife within a limitedtime.
5. Surface coating: After the putty layer is cured, stir the main material of the microbead anti-slip surface paint evenly; The curing agent is added to the color paint bucket, and after fully stirring, it is evenly coated with a professional rolleruntil the surface particle fineness is uniform.
Construction Section Diagram
TECHNICAL INDEX
| PILOT PROJECT | INDEX |
| State in container
| No hard pieces, uniform state |
| Film appearance | The paint film looks normal |
Drying time (H,25°C) | Table dry :≤4; Practical work :≤24 |
Pencil hardness (H) | ≥3H |
Adhesion (grade) | ≤1 |
Impact resistance (Class ll) | 1000g steel ball, height 100cm Coating film no cracks, no peeling |
Wear resistance (700g/500r. Weight loss g) | ≤0.030 |
Water resistance (168h) | Does not blister, does not flake, allows light Slight discoloration, recovered after 2 hours |
Skid resistance | ≥0.65 |
Oil resistance (120# solvent gasoline, 72h) | Does not blister, does not flake, allows light microdiscoloration |
| Acid resistance (10%H₂SO₄, 48h) | |
Alkaline resistance (20%Na0H,72h) |
Project Case
