Epoxy Mortar Floor Coating | Heavy-Duty Anti-Crack & Wear-Resistant Industrial Flooring
- Model
- PU-015
Review
Description
Information
Epoxy Mortar Flat Coating Flooring Material
Epoxy mortar floor coating combines epoxy resin and quartz sand for 2-3mm thick, high-compressive (≥50MPa) surface. Ideal for heavy-load workshops, logistics centers. Resists abrasion, impact, and cracks. Solvent-based formula dries in ≤4 hours, compatible with roller/trowel application.
Scope Of Application
Areas with high mechanical performance requirements, such as cement or terrazzo ground requiring strong wear resistance and certain impact resistance of machinery factories, hardware factories, wharves, driveways, garages, industrial plants, auto and aircraft repair plants.
Product Features
1. dustproof, moisture-proof, easy to clean;
2. wear resistance,impact resistance, high hardness.
3. can be made non-slip ground, matte or bright effect.
Construction Technology
1. plain treatment: basic floor grinding, cleaning;
2. epoxy primer: Paint epoxy resin primer;
3. epoxy coating: batch scraping epoxy resin mortar;
4. epoxy batch coating: batch scraping epoxy resin putty;
5. epoxy coating: Paint epoxy resin paint.
Construction Section Diagram
TECHNICAL INDEX
| PILOT PROJECT | INDEX |
| State in container | No hard pieces, uniform state |
| Film appearance | The paint film looks normal |
| Drying time (H,25°C) | Table dry ≤4; Practical work ≤24 |
Pencil hardness (H) | ≥2H |
Adhesion (grade) | ≤1 |
Impact resistance (Class ll) | 1000g steel ball, height 100cm Coating film no cracks, no peeling |
Wear resistance (700g/500r. Weight loss g) | 0.030 or less |
Water resistance (168h) | Does not blister, does not flake, allows light Slight discoloration, recovered after 2 hours |
Oil resistance (120# solvent gasoline, 72h) | Does not blister, does not flake, allows light microdiscoloration |
Acid resistance (10%H₂SO₄, 48h) | |
Alkaline resistance (20%Na0H,72h) |
Project Case
